Home > Product > Cookware > Sauté Pans& Lids
Short Body Sauce Pan
Short Body Sauce Pan Display pictures2 Display pictures3 Display pictures4 Display pictures5 Display pictures6 Display pictures7
Short Body Sauce Pan
  • Features Short Body Stainless Steel Sauce Pan with Tri-clad Bottom

    ● Food grade, durable stainless steel material.
    ● Wall thickness 0.8 mm, lid included.
    ● Sauté Pan comprise 4 mm fully encapsulated aluminum thermic base.
    ● Available in 0.5 litre to 7 litre capacity sizes.
    ● Riveted stainless steel ears, handles & lids which don't get hot.
    ● Interior and exterior ‘fine satin’ finish makes for easy cleaning and reduces the signs of use.

Detailed

This range of sauce pan is designed for professional cooking. With food grade of stainless steel (AISI 201 or AISI 304), combining the heat distribution of aluminum with the durability and magnetic properties of steel to allow induction cooking. This guarantees the corrosion resistance and optimal heat conduction.

 

Model

Dimensions
(dia. x h) (mm)

Body Thickness 

(mm)

Bottom Thickness

 (mm)

Capacity 

(Ltr)

Packing Dimensions
(dia. x h) (cm)

Note 

QTY/CTN

Note 

 

SB

120 x 50

0.8

4

0.5

43x31x15

12

Double ear 

SB

140 x 55

0.8

4

0.8

53x34x15

12

Double ear 

SB

160 x 60

0.8

4

1.2

40x22x9

2

Single handle

SB

180 x 65

0.8

4

1.6

43x26x9

2

Single handle

SB

200 x 70

0.8

4

2.2

43x28x10

2

Single handle

SB

220 x 75

0.8

4

2.8

47x29x11

2

Single handle

SB

240 x 80

0.8

4

3.6

50x33x11

2

Single handle

SB

260 x 85

0.8

4

4.5

63x38x12

2

Ear+ handle

SB

280 x 95

0.8

4

5.8

65x38x12

2

Ear+ handle

SB

300 x 100

0.8

4

7.0

70x39x13

2

Ear+ handle

 

 

 

Stainless Steel Cookware Care and Use

 

Important Safeguards

      Do not allow children to get close to the stove while cooking.

      Never leave cookware on heat resource without food or liquid inside.

      Never let food or liquid boil dry, and always use gloves or towels to hold the hot cookware.

 

Before the First Use - Uncoated

      Remove all packaging and labels. Please recycle waste properly.

      Wash the pan in hot, soapy water, then rinse and dry thoroughly.

 

Before the First Use - Coated

      Remove all packaging and labels. Please recycle waste properly.

      It is beneficial to condition the coated surface before using the cookware for the first time. Rub a film of cooking oil over the surface, heat the pan for 2 minutes over a medium heating, then cook and rinse it with hot water, softly dry with a towel.

 

Cooking Tips

      To prevent sticking, spray pan with nonstick cooking spray or add a small amount of oil, margarine, or butter to a cold pan. Heat on medium temperature for one to two minutes before adding food. 

      Be sure your cooking surface is level. Burners and stoves that are not level may cause fats to pool: pooled fats and oils do not adequately cover cooking surfaces. 

      Clean pan thoroughly after each use. Food films cause sticking and discoloration on the pan when pan is reheated. 

      Sticking may also be caused by high heat. When fats or oils smoke, the heat is too high. 

      To avoid salt damage (small white dots or pits), add salt after food getting cooked or after liquids getting boiled. Pitting does not interfere with cooking performance, but it can diminish the appearance of the stainless steel. 

      Do not store foods seasoned with salt in cookware. 

 

Care and Cleaning 

      Do not use steel wool, scouring pads, oven cleaners, bleach or strong abrasive cleaners to wash your cookware. All of the cookware will last longer and look better if washed by hand with hot soapy water.

      Using plastic, wooden or rubber utensil for coated cookware is recommended.

      To remove white film caused by starch or water minerals, rub with sponge that has been dipped in lemon juice or vinegar, then wash with hot, soapy water.

      To remove food burnt to the bottom of cookware, boil a mild solution of vinegar and water for 10 minutes to disclose food particles.

 

 

Hits:  UpdateTime:2018-06-08 09:37:06
Follow us
Jiangmen Dombok Hardware Co.,Ltd

ADD:Guangdong province Jiangmen city Pengjiang

District Hetang Tagang Sha Lu development zone

two Zhongxing Road gas station 100 meters

TEL:0086-750-3732988

FAX:0086-750-3751638

CELL PHONE:0086-13923077922

CONTACT:Mr. Hu

MAIL:info@dombok.com

MAIL:xinbaoli@jmxbl.com

WEBSITE:www.jmxbl.com

Copyright © 2018 Jiangmen Dombok Hardware Co.,Ltd DesignESUN 粤ICP备15036246号